product description Expand your network with the UAP-AC-SHD access point with a dedicated security radio from the Ubiquiti workshop.
The device is part of the complete line of UniFi products, it supports the 802.11a/g/b/n/ac/ac-wave2 standards, when it uses both the 2.4GHz and 5GHz bands. To support the performance of the wireless part, the UAP is equipped with two Gbit Ethernet ports that are compatible with the 802.3at PoE+ standard. The maximum power of the radio part is 25dBm in both bands, supported by four antennas with 6dBi gain. Encryption using WPA2 is commonplace today. The UAP can be installed on the same holder as the UAP-AC-PRO, so there is no need to exchange device holders in the event of a network upgrade. Advantages over UAP-AC-HD
airView – with the help of an added card compared to the classic model, it allows you to monitor the wireless spectrum in real time, the occupancy of individual channels without impacting performance or connected clients.
airTime – analysis of all SSIDs, stations, data types and interference in real time without impact on performance or connected clients.
WIPS – a special chip serves for protection against intrusion into the network and maximum security. Advantages of MU-MIMO technology
Thanks to MU-MIMO (MultipleUser – Multiple In – Multiple Out) technology, the UAP-AC-HD is able to communicate with several devices at the same time:
4 clients 1×1
2 clients 2×2
1 client 2×2 + 2 clients 1×1
1 client 3×3 + 1 client 1×1 Comprehensive control SW for all UniFi products
For the device, you need to download the original software called UniFi Network application from the official website, thanks to which the entire network can be controlled. The indisputable advantage of the UniFi Network application is that it is completely free without any restrictions!
This central management will allow you to upload maps and set basic parameters such as SSID, guest account, start page, traffic statistics and the list and status of associated clients always easily and quickly. Advantages of the UniFi solution Zero Handoff Roaming – uninterrupted transition between individual APs Wireless uplink (suitable where it is not possible to get a data cable) up to 4 SSIDs detailed traffic statistics Guest network Voucher system Load balance – maintaining an even load/switching of clients rate limiting for each SSID Package contents (5) equipment (5) ceiling mounting kit (5) set of screws Technical parameters Wireless features
Wireless frequency: 2.4 + 5GHz (dual band)
WiFi standards: 802.11ac, 802.11ac – wave2, 802.11n, 802.11a, 802.11b/g
MU-MIMO: Yes
WiFi transmission speed – 2.4GHz [Mb/s]: 800
WiFi transmission speed – 5GHz [Mb/s]: 1733
Transmit power 2.4GHz [dBm]: 25
5GHz transmit power [dBm]: 25
Encryption: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) 802.1w/PMF
2.4GHz OUTSIDE: 4×4
5GHz OUTSIDE: 4×4
Antenna type: Built-in
Number of built-in antennas: 4
Roaming: Yes
Antenna gain [dBi]: 6 Physical characteristics
Use: Internal
Buttons: Reset
Operating temperature [?C]: -10 to 70
Weight [g]: 700
Depth [mm]: 220
Width [mm]: 220
Height [mm]: 48 Connectors and interfaces
LAN Speeds: (2) 10/100/1000Mbps
Gigabit LAN: Yes Others: Safety radio part Power supply
Max. power consumption [W]: 20
Power supply via PoE: 802.3at, 44 .. 57V DC
PoE types: PoE-In only Software
Operating mode: Access Point
IPv6 support: Transparent (bridge mode)
Default IP address: Dynamic from DHCP
Default username and password: Ubiquiti/Ubiquiti