UBNT PowerBeam M5, antenna 300mm, 5pack OVERVIEW
PowerBeam is based on the former very successful NanoBridge product line.
It now includes more powerful hardware and a smarter design.
The design has been simplified to the maximum, installation in the field is now faster and more convenient, for the sake of interest I would like to mention the button for releasing the main unit (radiator), which was a problem with the older generation.
Inside the PowerBeam is a powerful Atheros 74KC MIPS processor with a frequency of 560MHz, which is supported by 64MB of DDR2 type operating memory and 8MB of Flash memory.
The network port supports 10/100 Ethernet and the unit can be powered via passive PoE 24V/0.5A (active PoE according to 802.3af is not supported).
The theoretical maximum throughput of the unit is 300Mbit (MCS15,802.11n, 2x2MIMO, at a channel width of 40MHz). SPECIFICATIONS
Frequency (MHz): 5170-5875
Standards: 802.11a/n
Maximum transmission speed: 300Mbps
LAN port: 1x RJ45 10/100Mbps
Power supply: 12-24V (PoE only)
Wireless operating modes: AP, Client, WDS
Operating modes: Bridge, NAT
DHCP server/client: Yes/Yes
External antenna output: No
Other outputs:-
Encryption: WPA2 only
Minimum sensitivity: -96
Operating temperature: -40 to 70?C
Power regulation: Yes
Max. output power: 23dBm
Number of antennas: 1 (dual)
Beam angle H/V: 8?/8?
Antenna gain: 22dBi
AirMAX: Yes
Chipset: Atheros
Processor: MIPS 74KC, 550MHz
RAM: 64MB
NAND: 8MB
Weight: 1.2 kg
Operating system: AirOS
Supported OS:-
IPv6 support: Transparent (bridge mode)
Default IP: 192.168.1.20
Default username/password: Ubiquiti/Ubiquiti
Outdoor use: Yes Package contents:
(x5) emitter PoE psu power cable manual mounting kit for attaching to the mast parabola plastic radiator holder