product description Incorporating advanced technology with the proprietary airMAC ac protocol, the PowerBeam ac ISO Gen2 is ideal for installations where maximum performance and RF isolation are required. 2.4GHz radio management
The replacement for PowerBeams with 300mm and 400mm ISO dishes is the complete PBE-5AC-GEN2-ISO wireless unit, which also has a 2.4GHz management radio for managing the unit using mobile devices. Noise isolation
Products from the airMAX ac series offer improved response, higher immunity against ambient noise, greater coverage and a significant increase in throughput. The collared parabola together with the metal-plated radiator holder ensure better isolation of both the surrounding RF signal and the radiated RF signal itself. Below in the picture, a comparison of the classic parabola and the ISO design. Software
The airMAX ac technology is proven by millions of installations around the world, which confirm the excellent performance.
The airMAX TDMA protocol enables unprecedented coverage, high throughput and low latency in unlicensed point-to-multipoint networks. Package contents
(x5) device parabola mast holder Gigabit PoE power adapter 24V/0.5A power cable plastic part for attaching the radiator radome cover Technical parameters Wireless features
Sensitivity [dBm]: -96
Frequency range [MHz]: 5150-5875
Maximum modulation: 256QAM
Wireless frequency: 5GHz
WiFi standards: airMAX ac
WiFi transmission speed – 5GHz [Mb/s]: 866
5GHz transmit power [dBm]: 24
Encryption: WPA2 AES
5GHz OUT: 2×2
Antenna type: Built-in
Number of built-in antennas: 2
Antenna gain [dBi]: 25 Physical characteristics
Use: Outdoor
Collar: Yes
Buttons: Reset
Operating temperature [?C]: -40 to 70
Weight [g]: 3220
Depth [mm]: 261
Width [mm]: 459
Height [mm]: 459 Hardware
Operating memory size [MB]: 64
CPU: MIPS 74KC Connectors and interfaces
LAN Speeds: (1) 10/100/1000Mbps
Gigabit LAN: Yes
Others: WiFi management radio Power supply
Max. power consumption [W]: 8.5
Power supply via PoE: 20 .. 26V DC
PoE types: Input Software
Operating mode: Client, Repeater, AP Router, AccessPoint, Client Router (wisp)
IPv6 support: Transparent (bridge mode)
Default IP address: 192.168.1.20
Default username and password: Ubiquiti/Ubiquiti