E10M20-T1: M.2 SSD and 10GbE combo adapter card increases performance 10GbE bandwidth and M.2 SSD cache – all together
The Synology E10M20-T1 helps increase I/O performance and bandwidth at the same time by using your Synology NAS single PCIe expansion slot. HARDWARE In general Host bus interface: PCIe 3.0 x8 Holder height: Low profile and full height Size (height x width x depth): 71.75 mm x 200.05 mm x 17.70 mm Operating temperature: 0 ? C to 40 ? C (32 ? F to 104 ? F) Storage temperature: -20 ? C to 60 ? C (-5 ? F to 140 ? F) Relative humidity: 5% to 95% RH Warranty: 5 years (Note: The warranty period begins on the date of purchase indicated on the receipt.) Storage Storage interface: PCIe NVMe Supported size: 22110/2280 Type and number of connectors: M-key, 2 slots Sew IEEE requirements: Ethernet IEEE 802.3an 10 Gbps, IEEE 802.3bz 2.5 Gbps/Ethernet 5 Gbps, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3x flow management Data transfer rate: 10 Gbps Network operation mode: Full duplex Supported features: Jumbo Frame 9 kB; TCP/UDP/IP Checksum Offloading; Automatic negotiation between 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps (Note: DSM requirement: 6.2.3-25426 or later) Compatibility – Supported models (NVMe SSD) SA series: SA3600, SA3400 Series 20: RS820RP +, RS820 + Series 19: DS2419 +, DS1819 + Series 18: RS2818RP +, DS3018xs, DS1618 + More information can be found on the manufacturer website: https://www.synology.com/en-us/products/E10M20-T1