product description
HG3-TP-S40 is a 5GHz sector antenna of the “horn” type from the RF elements workshop and features a 40 ? symmetrical beam angle and a gain of 16dBi. This antenna offers the perfect combination of features and functions that address the major weaknesses of today mainstream sector antennas. 2nd generation improvements Lighter design Improved holder Easier mounting on the opposite side Improved front cover TwistPort connector
The TwistPort connector is virtually lossless and changes all established standards thanks to its easy handling. There are no RF connectors or RF cables that cause significant signal loss. Compared to commonly used coaxial cables and connectors, the loss on TwistPort is almost immeasurable. Connection and disconnection is ingeniously simple and can be done with one hand. No side lobes
Symmetrical antennas do not emit side lobes, they literally focus energy on one main signal beam. This behavior is one of the most important in wireless networks. Thanks to these unique radiating properties, the radio collects considerably less noise than existing antennas in the mainstream sector. The noise problem is directly linked to the side lobes of the antenna – an essentially inevitable element in most competing products. Symmetrical antennas behave differently, they are basically “deaf” outside the main beam. Coverage without dead zones
The coverage of traditional sector antennas has a specific shape – if the AP is too high, then clients who are close suffer from poor signal quality. As the saying goes: “there is the greatest darkness under the candlestick.” Symmetrical sector antennas emit a signal with a circular beam that is similar to torchlight. For this reason, signal coverage from symmetric sector antennas is almost free of dead zones, and clients located close to the AP will be satisfied. Excellent scalability
The unique radiation characteristics, minimal side lobes and extremely low back radiation allow the placement of multiple antennas at one point and the construction of multiple separate points, which will allow better distribution of the load on individual APs and increase speeds to individual clients. Platform support
For use by third-party products such as MikroTik, Ubiquiti or Cambium, RF elements offer a wide range of adapters that allow these devices to be easily connected to a TwistPort connector. This allows you to transfer any unit to another antenna with a single click without screwing the pigtails. Robust and durable
Symmetrical sector antennas are created using a solid metal structure. The best available materials were used in the production: aluminum castings, high-quality ABS plastic and stainless steel. Technical parameters Wireless features Anteroposterior ratio [dB]: 35 Wireless frequencies: 5 GHz Radiate. azimuth plane angle (-6dB) [?]: 40 Radiate. elevation plane angle (-6dB) [?]: 40 Antenna type: Sector Antenna gain [dBi]: 16 Physical characteristics Wind resistance [km/h]: 160 Designed for mast diameter [mm]: 30 to 90 Use: Outdoor Material: Aluminum, UV stable ABS plastic, Stainless steel, Polycarbonate, Polypropylene Weight [kg] 1,8 Depth [mm] 223 Width [mm] 345 Height [mm] 217 Connectors and interfaces RF connectors: TwistPort