Mikrotik RBSXTG-5HPacD-SA, 13dBi, L4, high power, AC, sector AP Overview MikroTik platform system solution for wireless Internet service providers. RouterBoard with integrated 802.11ac module in a waterproof UV-resistant box with an integrated sector MIMO antenna with a gain of 13dBi and a beam angle of 90 ?. The active elements of the 802.11ac standard enable the achievement of up to 540Mbit of real transmission speed (866Mbit datarate). 20/40/80MHz channels and 256-QAM modulation are supported. The device supports client mode (CPE), point-to-point and point to multipoint (AP) modes and is backward compatible with 802.11an elements. Increased operating temperature range! (-30 ? C to + 80 ? C) Specifications equipped with Gigabit Ethernet port based on 720MHz CPU has 128MB of RAM integrated dual chain 5Ghz high gain 1300mW 802.11ac module pre-installed activated RouterOS L4 license Part of delivery 1x outdoor unit RBSXTG-5HnD 1x mounting preparation for mounting the unit on a mast/console 1x power supply 1x POE injector CPU QCA9557 720MHz CPU Memory 128MB DDR2 HIND Gigabit 1x 10/100/1000 Ethernet Wireless Onboard dual chain 5GHz 802.11ac QCA9882 wireless module ESD protection 10kV ESD protection on each RF port Supported channels 20/40/80MHz Supported modes Point to Point, Point to Multipoint Additional Reset switch, beeper, USB 2.0 port, voltage and temperature monitors LEDs Power LED, Ethernet LED, 5 wireless signal LEDs Power options
Power over Ethernet 8-30V DC Power supply 24V DC 0.8A power adapter and passive PoE injector Dimensions 140x140x56mm Weight (without packaging, adapters and cables) 265g Max consumption 12W Operating Temp -30C .. + 80C OS MikroTik RouterOS, Level4 license Package contains SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide Certifications FCC, CE, ROHS ! WARNING!
The manufacturer Mikrotik does not provide a guarantee for equipment damaged by overvoltage.
The device must be adequately protected against induced electrostatic overvoltage or overvoltage peaks on the power line.
For outdoor installations, use only shielded cabling (FTP/SFTP) and ground the units correctly (via the integrated grounding element or using Ethernet surge protection).