RB931-2nD based on the hAP model line is a home router in a mini design (height only 8cm).
Despite the very favorable price at the same time offering advanced features and settings, it is suitable for home or office. Integrated two 1.5 dBi antennas for the 2.4GHz band, pre-installed RouterOS L4 license allowing the device to operate in AP mode.
It is based on a 650MHz processor and has 3x LAN ports. It has a low power consumption of 3.5W, thanks to which it offers the possibility of powering via USB cable (microUSB). hAP mini is delivered including cover, stand and power supply, by default it is preset as a home AP (just connect to the power supply and the Internet and the AP is ready for operation). Technical Specifications:
DHCP: Yes
Transfer rate: 300Mbps
Standards: 802.11b/g, 802.11n
Chipset: Atheros AR9533
Max. output power (dBm): 22
LAN ports: 3x 10/100 Mbit/s, Auto-MDI/X
Default IP: 192.168.88.1
Default name: admin
Power supply (V): 5 (USB)
LAN interface: Consumption (W) 3.5
Gain (dBi): 1.5
Processor: QCA9533 650 MHz
RAM (MB): 32
Weight (kg): 0.18
IPv6 support: Full
Height (mm): 48
Width (mm): 81
Depth [mm]: 78
Operating temperature max (? C): 50 Notice:
The manufacturer Mikrotik does not provide a guarantee for equipment damaged by overvoltage.
The device must be adequately protected against induced electrostatic overvoltage or overvoltage peaks on the power line.
For outdoor installations, use only shielded cabling (FTP/SFTP) and ground the units correctly (via the integrated grounding element or using Ethernet surge protection).