Wireless AC1200 Dual-Band Unified Access Point DWL-6610AP Description The DWL-6610AP is an affordable dual-band Wi-Fi AC1200 unified access point that enables businesses of all sizes to build a fast and reliable wireless network. Thanks to its elegant and stylish design, the DWL-6610AP can be used discreetly anywhere. Key features Wi-Fi AC1200 It supports up to 32 SSIDs, 16 for each band, including client isolation. It supports both 2.4GHz and 5GHz bands simultaneously. Access points can be managed from unified Wi-Fi controllers of the DWC series. The DWL-6610APE can be easily mounted on any wall or ceiling. DWL-6610APE, enclosed in a UL2043 (Plenum Rated) certified enclosure, adheres to strict fire regulations for installation in air-conditioned rooms. Integrated support for 802.3af Power over Ethernet (PoE) power ** allows for more convenient deployment with a single Ethernet cable. The DWL-6610AP with Band Steering detects if the wireless client is capable of dual band connection and, if so, automatically connects it to the less congested 5 GHz band. This is done by actively blocking the client attempts to connect to the 2.4 GHz network. The unified Wi-Fi access point DWL-6610AP can be managed separately from the web interface, using SNMP and CLI commands (console, Telnet), in a group of up to 16 access points using the built-in “Cluster” function or centrally from a simple graphical interface D-Link Wi- DWC series fi controller. The DWL-6610AP is equipped with a schedule function that turns off wireless transmission when not needed (eg at night or outside business hours). This saves energy and increases network security. Technical product specifications Type Hardware-managed AP Wireless standard Wireless AC Frequency band mode Dual-band simultaneous Wireless speed 300 Mbps 2.4 GHz 867 Mbps 5 GHz Antenna type Embedded omni-directional antennas Antenna gain 3.5 dBi for 2.4 GHz 5 dBi for 5 GHz Power-over-Ethernet Yes Wired interface 1 x Gigabit Ethernet LAN Console port Yes Indoor/outdoor Indoor Type of housing Plastic Plenum rated (UL-2043) Yes Wireless modes Access Point (AP) WDS bridge Advanced features OUTSIDE Maximum number of SSIDs 16 per radio Auto channel selection Yes WMM-PS/802.11e (U-APSD) Yes Wi-Fi scheduler Yes AP traffic load balance Yes L2 roaming Yes WPA/WPA2-Personal/Enterprise Yes TKIP/AES encryption Yes WLAN partition Yes SSID broadcast disable Yes Rogue AP detection Yes Isolation station Yes MAC address filtering Yes 802.1X authentication Yes Controller managed features AP load balance Auto-channel, auto-RF management Captive portal L2/L3 fast roaming Rogue AP mitigation View neighbor AP information WIDS/WIPS Supported D-Link Wireless Controllers/Unified Switches DWC-1000 DWC-2000 DWS-4026 Management platform Hardware controller: DWC/DWS Series WEB Yes SNMP (v1, v2c, v3) Yes Telnet Yes SSH Yes Configuration group sync through AP Array (up to 8 APs) Yes