Description Indoor dual AP for wireless signal coverage. The AP operates in two frequencies simultaneously (2.4 and 5GHz) and its advantage is the support of the fastest 802.11n and 802.11ac standards. The ideal solution for wireless applications in public spaces (hotels, shopping malls, hospitals, airports, etc.).
The unobtrusive design allows installation in standard power line sockets. wsAP has three ethernet ports: one located on the back for easy PoE-in connection, two ports behind the front cover.
The built-in USB 2.0 (type A) port is used to connect external memory or, for example, to charge mobile phones. The unit is also equipped with a through telephone input (RJ11) used, for example, to connect a desktop telephone in a hotel room.
An optional accessory is a set of security screws (set K50) against unwanted intrusion into the unit. 2.4GHz integrated 1.5dBi antennas support 2×2 MIMO 802.11b/g/on 3dBi 5GHz antenna with 802.11ac support. Power supply via PoE-in (802.3af/at support), on the third eth PoE-out port, power supply range 18-57V. RouterOS supports IPv6 networks and the following features are implemented in the current version:
? static addressing and routing
? router advertisement daemon (for address autoconfiguration)
? Dynamic routing: BGP +, OSPFv3, and RIPng protocols
? firewall (filter, mangle, address lists)
? DNS
? 6in4 (SIT) tunnels
? telnet
? ping
? traceroute
? web proxy
? sniffer and fetch tools Technical Specifications:
Product code: RBwsAP-5Hac2nD
CPU: QCA9531
CPU nominal frequency: 650 MHz
Memory: 64 MB
Storage type: Flash
Storage size: 16 MB
10/100 Ethernet ports: 3
Wireless: 2.4GHz, 5GHz
Operating frequency: 2412 – 2484MHz, 5150 – 5875 MHz
Protocols: 802.11b/g/n, 802.11ac
Number of chains: 2 (2.4GHz), 1 (5GHz)
Antenna gain: 1.5dBi (2.4GHz), 3dBi (5GHz)
Power options: PoE-in 802.3af/at, PoE-out passthrough (Ethernet 3), 18-57 V
Consumption: 10 W
Dimensions: 112 x 126 x 30 mm
Operating temperature: -40 ? C .. + 60 ? C tested
LEDs: 7x LEDs
License level: 4
USB: 1x USB 2.0, max output current for external devices 500 mA
Operating system: RouterOS Notice:
The manufacturer Mikrotik does not provide a guarantee for equipment damaged by overvoltage.
The device must be adequately protected against induced electrostatic overvoltage or overvoltage peaks on the power line.
For outdoor installations, use only shielded cabling (FTP/SFTP) and ground the units correctly (via the integrated grounding element or using Ethernet surge protection).